INDUSTRIAL MAGNETIZER SYSTEMS
A brief review of the Magnetizer installations referenced by some of the FORTUNE 100 clients (certified REFERENCES are on MEMBERS pages):
Coca-Cola Bottling Plant in Queens, New York, U.S.A.: on natural gas burners and cooling towers, on water softening system and condensers.
New York Hilton Hotel in Manhattan, U.S.A.: A series of Magnetizer Water Systems have been installed on cooling towers and two 250 ton coolers for several years now. The scale has been reduced practically to zero and use of chemicals has been reduced to zero except for a small quantity of biocide, required by law to stop the algae growth. The maintenance cost has been significantly reduced as well. You may want to ask us for testimonial from Hilton New York (document: “Hilton.pdf”).
IBM Center in White Plains, New York: The IBM Center tested the Magnetizers on 225 KW natural gas burners, with 3 inch galvanized lines. The monitoring of the tests was made in the presence of Global EnviroTech Inc., Valco Energy Systems, and supervised by the technical personnel at IBM. The average fuel consumption by degree day with the Magnetizer treatment has been reduced by 17%. The estimated average annual savings amounted to $20,000.00.
The Canadian Postal Service – Tour Nord: Three Magnetizer systems have been placed on 3 heaters used to heat this postal sorting facility. The heater instrumentation included various thermal gauges but not the gas meter. The combustion efficiency has been measured by the intermediary of raising the registered temperatures. More than 22 increases of temperature have been measured, and by comparing 11 increases without the Magnetizer with 11 measurements with the Magnetizer, a 9.8% thermal efficiency has been established.
Novotel Hotel, Dubai, United Arab Emirates: The Magnetizers have been installed on laundry vapor heaters, ice makers, espresso coffee machines and a dish washer. The client has been extremely satisfied and has reported the following: 1. Elimination of the chemical treatment 2. No downtime during installation 3. Savings in labor and using it for other more important duties 4. Reduced labor and chemicals costs.
After the production process every Magnetizer is manually tested for polarity, gauss strength and workmanship before leaving our plant. If it fails our standards its either corrected manually, or sent back for re-production.