Those familiar with Magnetizer™ recognize it as one of the most effective eco-sustainable solutions to the ever-growing problems associated with water, or with toxic combustion emissions.
Here are the effects of different Magnetizer™ products on the environment.
|Water Conditioning||Softens water, eliminates chemicals while treating lime, salt, acids. Reduction in scale build-up, stops corrosion and metal pitting.||Decreases energy usage by 8-40% depending upon application. Reduces downtime and environmental pollution.||Energizing, polarizing and organizing random and clustered water molecules, changing their shape and molecular alignment.|
|Pools||Maintains pH without chemicals, discourages algae growth, improves water quality & clarity. No more scum and liming at water line. Filtration is more efficient. Easy maintenance.||Pump requires less electricity for filtration. Less algae removed by lysing, and fewer dissolved solids to remove. Non-caustic, soft silky water.||ibid.|
|Fuels, Natural Gas,|
Oil, LPG, Diesel,
Gasoline, Mazut, Synthetic Gas
|Improved combustion efficiency, air:fuel ratio, higher proportion of hydrocarbons burned in fuel.||Increased heating capacity, lowered fuel consumption and reduced emissions - less environmental pollution.||Changing electron spin and hydrogen's isomeric para-hydrogen form of fuel molecules to a more volatile (combustible) ortho-hydrogen,|
|Air Conditioning |
|Enhanced evaporator, less refrigerant boiling in compressor shell, reduced wear/tear on compressor.||Higher cooling/heating capacity, increased COP and reduced power consumption. Results depend on refrigerant/ blends used.||When applied electromotive forces create an energized ortho- electron spin within the atomic structure of the refrigerant its molecules disassociate more easily. This causes increase in the bubbles detached from the surface into the flow - which accelerates the boiling nucleation rate.|
|Oil Line Energizers|
Well tubing, Transmission
|Eliminates the heavy costs of hot oiling by eliminating paraffin. Corrosion stopped. Makes slow flow wells profitable.||Eliminates paraffin and reduces corrosion in down hole tubing and transmission lines.||Conversion from para- to ortho-hydrogen isomeric form causes break up of molecules and reduced viscosity and surface tension.|
|Crop Booster||Increased absorption of minerals, nutrients. Breaks up clodding and mineral bowl affect for increased root growth (alfalfa, apples, cucumbers, flowers, fruits, tomatoes, etc.). Soil holds moisture with greater penetrability.||Water is conserved, less manpower, reduced maintenance, less pumping energy required. Extended life-time of irrigation rigs.||Lowered surface tension of polarized water molecules causes water to penetrate better through the ground reaching easier plant's root cilia.|
Here is the comparison of the Magnetizer™ non-chemical water softening versus it’s non-magnetic technological counterparts.
|Chemical||Ion Exchange||Reverse Osmosis or Ultrafiltrations||The Magnetizer Technology|
|Chemical additives are used to control pH, thermal capacity, corrosion, etc. They are expensive||Salt based water softeners utilize the ionic exchange of the Sodium in salt (NaCl) for the Calcium (CaCO3), or other mineral, in the water (NaCl + CaCO3 = CaCl + NaCO3).||Involves forcing untreated water through a membrane that selectively filters certain constituents out off the fluid.||Nothing is added to the fluid - it works by rearranging the molecules already present in the fluid and additives are unnecessary.|
|System requires constant monitoring & maintenance to assure proper conditioning.||While soft water is produced, a considerable expense is incurred (price of softener, salt supplies, replacement of the ionized bed, the softener's average life of 7 years, health risks).||The system requires very high pressure because the membrane used as the filter medium is essentially non-porous.||No power required - permanent magnets supply "free" effective energy. No power supplies to burn out.|
|Chemicals may be hazardous to employees or environment whenever processes fluids are flushed /spilled.||Sodium must be added to the water in place of the mineral that is removed ("salt-ion exchange").|
The mineral deposits slowly damage the system.
|In areas that have high mineral or salt content, the membranes must be flushed frequently (and replaced often).||No continuing maintenance required after the installation and no recharging or further attention is needed following the initial techniques and/or the Stabilization Period.|
|May incur unwanted pressure drop increasing energy requirements.||The sodium released into the softened water is corrosive (the corrosion due to scale has been replaced with corrosion due to sodium - an undesirable trade-off).|
Health & environmental hazard due to hypertensive effect of sodium on human body (the delicate electrolytic balance of sodium/potassium ions is unsettled) and danger of sodium toxification to the area ground water (in increasing areas the communities, doctors, hospitals and rest homes prohibit salt-ion exchange systems).
|This always requires downtime and a major usage (loss) of water. R/O units typically waste half of the processed water.||A "snap-on" design, unlike the other solutions that are "inline" and become part of the system is removable (and portable) allowing risk free testing & installation.|
The Magnetizer™ technology effectively protects the environment by eliminating or reducing chemical additives used for water softening. It provides a natural, healthy, non-chemical, safe, permanent and low cost method of neutralizing acid water (stabilizing pH) and eliminating problems associated with hard, residual (waste) or saline water, while simultaneously protecting the environment.
Here is an excerpt from a report covering many parameters effected by Magnetizer™, e.g. the Sodium Adsorption Ratio (SAR)*. In high visibility tests Magnetizer™ brought significantly down the Sodium content in water. These tests were conducted only upon the fourth day after Magnetizer™’s installation in a water irrigation system in a country where water is a scarce and valuable resource:
A VIP status Client complained on unusually high Sodium content in his property (a large Middle East plantation using desalinated water), whereas the EPA highest admissible level of Sodium content (Standard Limits or Benchmark Parameter) is 500 mg/l.
A solution was recommended, i.e. the Magnetizer™ systems.
Before the Magnetizer™ installation Client’s property showed hazardous, higher than EPA admissible, sodium level, i.e. 637.640 mg/l.
The simple, fast and effective Magnetizer™ installation has quickly lowered the Sodium content to the unprecedented and healthy “world record” level of 64.100 mg/l.
Therefore a significant reduction of the Sodium level—in an important capability test, in harsh environmental conditions (Middle East) and for an important Client—has been achieved by as much as … 90%.
*Sodium Adsorption Ratio (SAR) is a measure of the suitability of water for use in agricultural irrigation, as determined by the concentrations of solids dissolved in water. It is also a measure of the sodicity of soil, as determined from analysis of water extracted from the soil.
Although SAR is only one factor in determining the suitability of water for irrigation, in general, the higher the sodium adsorption ratio, the less suitable the water is for irrigation. Irrigation using water with high sodium adsorption ratio may require soil amendments to prevent long-term damage to the soil.
If irrigation water with a high SAR is applied to the soil for years, the sodium in the water can displace the calcium and magnesium in the soil. This will cause a decrease in the ability of the soil to form stable aggregates and a loss of soil structure and tilth. This will also lead to a decrease in infiltration and permeability of the soil to water leading to problems with crop production.
The Magnetizer™ technology effectively protects the environment by significantly bringing down emissions of CO, HC, NO, NOx generated while burning fuel and by lowering CO2 in absolute terms (CO2% is going up in combustion process itself).
An excerpt from a government report in the U.S.:
Content Emissions Tests were performed before the installation and after Forty (40) Days of Running with the Magnetizer™ System. The tests proved that there was a significant reduction in CO and NOx after the system was installed on the truck.
Emissions Tests on Truck 427
Prior to Installation After Change
CO (Carbon Monoxide) 1.0% 0.1% 90% Decrease
CO2 (Carbon Dioxide) 4.0% 14.6% 365% Increase
O2 (Oxygen) 0.29% 0.19% 53% Decrease
NO (Nitrogen Oxide) 201 21 89% Decrease
NOx (Nitrous Oxides) 186 24 87% Decrease
These results confirmed that more Fuel was burned (residual O2 went down showing more O2 combining with H and C) in the engine (better gas mileage) producing more heat, more CO2, and less pollutants (CO, NO, NOx).