- Algae traditionally built in the hot water tank and back of the toilet is eliminated. Even fish tanks will stay cleaner longer (make sure your water is filtered if used for a fish tank). Hint: You may check your toilet water tank 30 days after the installation. If you don’t have MAGNETIZER®, there will always be a brown or black coating of algae inside your water tank under the water line. With MAGNETIZER®, it will be gone as it removes the algae.
- Aerators on faucets will not clog.
- Keeps deposits from forming on dishwasher and toilets
- The chlorine smell will be removed or greatly decreased – the chlorine stays in solution longer – people who are strongly affected by the chlorine smell are no longer affected after installing MAGNETIZER®.
- Water will taste better because of a pH change (balancing it to around 7).
- There will be more sodding and less soap, detergents, and shampoo that needs to be used.
- The hot water tank, plumbing, dishwasher, etc., will last longer.
- Excellent for gardens – shortens crop cycle, so garden yields more and larger fruit in less time.
- You will notice your hair is shiny.
- Lower surface tension means you need fewer detergents that now penetrate clothing better and release stains more effectively.
WE ALREADY HAVE A WATER SOFTENER. CAN MAGNETIZER® HELP?
Yes. Let’s talk about the already-installed water softener. The MAGNETIZER®
will help as the surface tension of water is reduced, and when you add detergents to the magnetized fluid, it will mix and dissolve more promptly. The magnetized water enhances a traditional softener’s efficiency by augmenting the net ion charge; therefore, a better chemical reaction occurs in the usual exchange of ions. With the increase in efficiency, your water softening system will require less salt with MAGNETIZER®
as it is known to reduce salt consumption by more than 50 percent. However, the softener is not essential with MAGNETIZER®
as one of our distributors got softeners removed in a hotel’s coffee machines by MAGNETIZER®
“WE-S” system. With this change, the customers complimented the management about how they served the best coffee in town. The authorities at ASTB/Crippen Labs in New Castle, DE labs determined that the ion X-changer and filter removed around 90 percent of magnesium and calcium. “The MAGNETIZER®
system was attached to a breaker that contained magnesium and calcium in water solutions. The MAGNETIZER®
unit provided 99 percent removal efficiency of the magnesium and calcium dissolved in water.”
HOW CAN MAGNETIZER HELP THE REVERSE OSMOSIS SYSTEM? DO WE NEED ONE IN OUR HOME?
By improving the RO efficiency. Yes, experts recommend MAGNETIZER®
, as it will enhance your RO system’s operation. Reverse Osmosis provides ultra-filtration, which is why the water with high mineral content clogs the membrane with crystals of minerals. However, magnetized water prevents the formation of crystals, so placing the MAGNETIZER®
system on the feed of the Reverse Osmosis unit will contain the filtration clogging, which will eventually reduce the time wasted in flushing the clogged membrane of the filter. Additionally, the advantages of treating water with MAGNETIZER®
are dual as it reduces carbonate pore structure buildup and reduces the number of water clusters present in a non-chemical group of water molecules. With the reduction in the number of water molecules in the cluster there is a considerable reduction in surface tension of water from 71 dynes per sq. cm. to 62 dynes per sq. cm. With a decrease in the surface tension of water, less effort is required to thrust the water molecule through the membrane filter leading to energy efficiency. Mundi store has a MAGNETIZER®
TUBS system that has been bought by thousands of homes in the United States who purchase water purification tanks ranging from $2 to $3K like filtration steel tank systems, decontamination tanks, RO filter tanks, etc. In conclusion: MAGNETIZER®
is a vital companion to your filters that treat water naturally and chemically freely and condition it to protect your expensive filtration units by fighting against limescale, metal pitting, corrosion, and bacteria. Using one will also help your water softener, making it more efficient while not using salt and brine.
DOES IT WORK ON ANY PIPE?
It works on most PVC or PEX pipes and copper. It does not work out of the box on braided stainless steel/galvanized steel pipes. Call for details.
HOW LONG DOES IT LAST?
This product is an investment that lasts a lifetime. You will enjoy its power and service for many years as there will be no need for replacement, so you save a lot.
WHAT KIND OF MAINTENANCE DOES IT REQUIRE?
The upscale of this product is that it does not require any maintenance. It contains permanent ceramic magnets engineered initially by NASA that do not lose their power or degrade with time. Hence, we give you a lifetime guarantee of this product, and if there arises any need for replacement, we should replace them for free if they lose power in normal working conditions.
IS THE MAGNETIZER DIFFICULT TO INSTALL?
installation is an easy process. It requires no tools and can be as easy as tying a shoelace. Also, the best part about it is it is portable.
WILL IT REMOVE MINERALS FROM THE WATER?
No minerals are removed while using MAGNETIZER®
, which makes it healthy for people, plants, and animals. By keeping the minerals in the solution, the magnetic scale control systems will not let the minerals accumulate in plumbing systems and at heat-change locations. Limescale develops when the minerals in hard water precipitate out of the solution as the water is heated, forming hard crystals called Calcite. When water is passed through a properly designed and applied magnetic field, the physical nature of water and calcium molecules change to formless dense crystals called Aragonite. Since this carbonate mineral is very light, it remains suspended in the water flow until it passes out of the plumbing system. This prevents new scale formation and removes the existing scale over time. In closed systems (industrial boilers), the Aragonite slush descaled by MAGNETIZER®
has to be physically removed from the equipment.
WILL MAGNETIZERS AFFECT THE PH OF A FLUID?
affects the PH of fluid how you want it to, which means it stabilizes the PH. Magnetic influence configures fluids and ionizes such that the H+ and OH- ions move toward parity forcibly. This happens as they are placed in close physical proximity to other molecules that can accept these ions into their structures. The neutralization process is what it works on. Converting the acidic fluid into alkaline and alkaline into acidic by accelerating the general iconic content is what is termed neutralization. Additionally, this unique ionic activity buffers the pH, reducing the wide variations in fluids.
CAN IT REDUCE CORROSION?
Yes. And this happens in two distinct ways. 1. Magnetic influence neutralizes and buffers the liquid. 2. Dissimilar metals create electrical charges that alter equipment surfaces. 3. A MAGNETIZER®
water softener eliminates scale formation and any scale-related electrolytic corrosion. The adherence and subsequent electrochemical reaction of scale to a surface cause this type of corrosion. To alter the structure of the scale-forming minerals, these magnets magnetize any liquid which flows past them, disrupting their natural bond. This disruption leads to an alteration in the structure. The contaminants (such as calcium carbonate) remain suspended in water until it flows through your plumbing system, reducing corrosion.
CAN MAGNETIZER SYSTEMS HAVE A BENEFICIAL EFFECT ON FLUIDS PRESENTLY CONDITIONED WITH CHEMICAL ADDITIVES?
With the MAGNETIZER®
process, fluids mix more readily with conditioners because of their low surface tension. They tend to exhibit more wet behavior, and this uniform bonding improves the mixture. This utilizes chemicals more effectively. Briefly, the magnetic influence increases the fluid’s affinity for the conditioner – reducing the conditioner’s average precipitation from the liquid. As a result, the same conditioner works longer and, as a result, is less expensive.
CAN ANYTHING ADVERSELY AFFECT MAGNETIZED FLUID?
A robust physical disturbance can negatively impact magnetized fluid. As the molecules are tied into a rigid configuration forcibly by the magnets, if a pump impeller causes any turbulence, the water meter or the disturbance will make the magnetized fluid lose its orientation and qualities. For this reason, we always install our systems after such disorders; for example, after the water meter on a straight piece of pipe and on the hot water tank outlet pipe after any elbows. Sometimes we recommend increasing the magnetic boost using additional units mounted side by side. This is what is known as vibrational depolarization. Similarly, magnetized fluids that lie dormant for a long will eventually lose their induced orientation. Water treated by MAGNETIZER®
retains its magnetized state through up to 200 feet of pipe, depending on online OD and the systems used. The magnetic effect lasts up to 48 hours in stored water treated by MAGNETIZER®
magnets. Since most households use their water system regularly, they can be assured of a constant supply of properly conditioned water treated with MAGNETIZER®
DOES HEAT AFFECT A MAGNETIZED FLUID?
A magnetized fluid is not affected by heat but, interestingly, by heating. Currents during the process and physical movements of fluids, such as water coming to a boil, cause disorientation to the desired magnetic effect. This is why our systems are installed on the outlet pipe from the water heater and not the inlet pipe.
WHAT IS THE RECOMMENDED “STABILIZATION PERIOD”?
The Stabilization Period is needed to allow magnetism to penetrate metal pipes and remove all the existing limescale inside water pipes, fixtures, and appliances. It is required that after installing the MAGNETIZER®
” System, you open all your taps (hot & cold) at all sinks, showers, and bathtubs while flushing the toilets for 10-15 minutes once a week for the first three weeks. During the flushing cycle, some sediment may be deposited in the bathtub. This flushing technique will accelerate the Stabilization Period enabling you to enjoy the lifetime benefits of permanent, naturally conditioned, softer water more quickly. The stabilization Period in homes may vary from immediate (5-10 minutes after opening taps upon Magnetizer®
installation) to two weeks and even thirty days. In industrial applications, this can take up to three months. In the engine
fuel-air-coolant treatment by Magnetizer®
, the Stabilization Period is the amount of time it takes to dissolve the carbon/varnish buildup and magnetically saturate all the steel parts between fuel units and the combustion chamber. It is factory-recommended time allowed to saturate metal parts magnetically and clean the internal components of carbon varnish, allowing the engine to show more significant than the average amplitude of savings. The economy may initially fluctuate as the carbon and varnish are naturally eliminated during the Stabilization Period. After stabilization, the engine will run smoother and start easier. The Stabilization Period lasts approximately 30 days or 1,600 miles. The economy/performance will increase over that period resulting in higher efficiency. In gasoline engines, the MAGNETIZER®
Engine Fuel Saving Systems provide engines with “HIGH-TEST” performance while using Lower Octane Gas, thereby creating even more significant savings.
HOW DOES A MAGNETIZER® COMPARE TO AN ELECTROMAGNET?
has been scientifically designed to use its intense, focused, unipolar field to penetrate any pipe, PVC / glass included, and not perpendicular to it, on its surface, as electromagnets work with PVC or glass. In general, plastic does not conduct electricity. It has no free electrons. All the electrons are tightly bound to the atoms. That’s why plastic is inert. Although there are conductive plastics (special polymers), PVC is not one of them, and even if it conducts electricity, it does not work nearly as well as copper. PVC has the addition of plasticizers, the most widely used phthalates. In this form, it is not conductive and is used, for example, for insulation on wires, electrical cables, etc. Also, plastic has the potential to collect static charge on its surface (a possibly hazardous situation). So not only does PVC not conduct electricity, but all the electromagnetic charge travels over the surface, not through the body of the plastic pipe. That’s why at the water technology show in Marseille, France (“Hydrotop”), our distributor made side-to-side comparisons, and electromagnets did not work both on plastic (PVC) and glass pipes, whereas MAGNETIZER®
was performing very well. For more information, please click here