Modal PopUp_Superior Design

Our patented monopolar, permanent, energy-free method of magnetic treatment of liquids by only one pole of a magnet without cutting the pipes makes MAGNETIZER® stand out from its competitors.

Competitive devices differ in how they treat fluid passing through their positive and negative fields simultaneously and involve cutting off pipes. Furthermore, they are not compact and have a much more limited usage due to their design’s hazard and risk caused by pipe modification, such as reported fuel leaks (ICE engines, generators). In addition, their electrical power draw poses potential threats (refineries’ environment, etc.). They are also unsuitable for large pipe sizes, as they are not modular or do not work on certain types of pipes, e.g., electromagnets do not work on PVC or glass.

Question: One company says to put the magnets inside the pipe; is that better?

Answer: No, because firstly, you will have to have pipes cut to install inline (“wet”) devices, whereas MAGNETIZER® units you place on the outside of a tube (an easy-to-install snap-on design) without any modifications.

Magnetizer on the left vs. an inline system.​

A traditional bipolar device shown below requires cutting off pipes …

…as opposed to MAGNETIZER® technology which does not require cutting or modifying infrastructure, is more compact, and weighs much less on pipes.

Secondly, fluid passing through such an inline (“wet”) design causes wear and tear of the magnetic block as it is in direct contact. This mechanical interaction of the fluid with the magnet walls causes it to wear off quickly. Please check what their Warranty is. Mostly it is for two years, whereas you purchase MAGNETIZER® with a Lifetime Power Warranty, i.e., if our units ever lose their magnetic power, we shall replace them for free.

Thirdly, MAGNETIZER® does not come in direct contact with passing water. Because of that, in Switzerland, a country with some of the most rigorous health and hygienic regulations, MAGNETIZER® is exempted from federal and local certifications as it is a very safe water treatment technology.

Fourthly, MAGNETIZER® uses only one pole (South or North) to energize fluid. As a unipolar device, it is more efficient than bipolar systems, in which fluid passes through positive and negative fields and which magnetizes fluid less efficiently due to their multipolar charge characteristics.

IN CONCLUSION

MAGNETIZER® is more efficient than its competitors due to its monopolar fluid treatment method. It is compact, weighs less, and has a Lifetime Power Warranty.

MAGNETIZER® is exempt from health and sanitary certifications, as it does not get in direct contact with the flowing medium.

It is a superior proprietary, proven, readily available, bespoke fluid conditioning technology cut to your needs.

The magnets we deploy are the proprietary—100% US-made—applied science NASA utilizes. These are special ceramic alloys whose strength does not decrease over time. It means a one-time investment in MAGNETIZER® for the lifetime of a building, engine, furnace, boiler, or other equipment.

MAGNETIZER® is selected each time for a given installation according to the linear water flow rate, pipe diameter, type of pipe material, number of required rings, and the place of assembly